Motec LTC, User Manual

Page: 6 / 42

6 Introduction
LTC Manager Software Installation
The LTC Manager software is required for configuration and calibration of LTC
units. The software must be installed on Windows XP SP3 or later. The same
software package is used for the LTC, LTCD, LTC-NTK and LTCD-NTK.
Note: The LTC Manager software is not required if using a single LTC or
LTCD unit preconfigured by MoTeC.
Install LTC Manager Software
•
Go to the MoTeC website at www.motec.com and navigate to downloads
> software > latest releases > LTC Manager
•
Save the LTC Manager installation file in your preferred location (for
example desktop)
•
Double click the saved file to run the installer
•
Follow the installation instructions on the Install Wizard
•
To start the program after installation,
double click the LTC Manager icon on the desktop
OR
Click Start > All Programs > MoTeC > LTC > LTC Manager
Updating Software
Software updates are available free of charge, giving access to the latest
features for the life of the device. Download the latest software versions from
the website and follow the software installation instructions to update to the
new version.
To update the associated firmware in the device see Firmware .