Motec 406 0172 003, Installation And Operating Instructions Manual

Page: 17 / 44

17
GB
b) Plug connector "M" 9 pole SUB-D device socket
Device socket "M" terminal allocation
Socket contact Description Function
1 VID Video signal
2 VID_GND Video shield
3 - -
4 GND Ground
5 - -
6 - -
7 POC Power 12V DC
8 - -
9 - -
c) Connectors C1 to C4 (camera 1 … 4) 4-pole mini-DIN device socket
Device sockets C1 to C4 terminal allocation
Socket contact Description Function
1 VID Video signal
2 - -
3 - -
4 VCC Supply, positive terminal
5 GND Supply, negative terminal
3.3 Configuration of control cables
a) Configuration for vehicles without trailers
With vehicles without trailers (e.g. waste disposal vehicle) the control lines must be connected
as follows:
Configuration for vehicles without trailers
Control line Function Connection to
Quad Split-screen Contact
POC Display contact On/Off Switch plus
SEL1 Control line 1 Reverse gear
SEL2 Control line 2 Contact (e.g for dumping)
SEL3 Control line 3 C24V
SEL4 Control line 4 Switch plus (e.g for front camera)