Motcom BeCOMS BCom, User Manual, Page: 42 / 82

motcom® BeCOMS® | BCom
User Manual
Release
130301 (revision 190211)
Page 3.14
3.6.5.2.5. PIN for Setup:
PIN for enabling write access to menu items in “Setup Parameter”, “Setup CPU”
and “Test Features”.
To enter PIN: press [Enter], the PIN field becomes highlighted. Use [▲] and [▼]
buttons to increase or decrease the value. When the correct PIN appears in the
value field, press [Enter] again. The screen at fig. 3.9., page 3.11 appears then,
and the system parameters can be changed now. If wrong PIN was entered, text in
the PIN field will be changed to “P??”.
3.6.5.2.6. Software Info:
Firmware version of the Evaluator (read-only).
3.6.5.3. Test Features
View and use test features of the Evaluator. To get access to this menu, a PIN must
be entered (see 3.6.5.2.5.) .
3.6.5.3.1. Ready Relay:
Switch the Ready relay ON and OFF
3.6.5.3.2. Alarm Relay:
Switch the Alarm 1 relay ON and OFF.
3.6.5.3.3. Alm2/Pre Relay:
Switch the Alarm 2 relay ON and OFF.
Fig. 3.10. BCom PIN for setup