Motcom BeCOMS BCom, User Manual, Page: 20 / 82

motcom® BeCOMS® | BCom
User Manual
Release
130301 (revision 190211)
Page 1.12
* only Setup function for Evaluator, no transmission of measured values
Features Professional Advanced Basic
Hardware
x = included o = optional - = not included
Power Supply 24V DC +30/-25% x x x
Sensitivity adjustable in 5 Steps x x x
2 alarm relays, Function programmable x x x
1 ready relay x x x
RS485 Interface x x x *
LC-Display 240x128 dots x x x
System status LEDs
(System Ready, Prealarm, Shutdown)
x x x
PC for data-logging which supports up to 6
systems
x x -
Modbus Interface o o o
Software Capabilities of the Evaluator
x = included o = optional - = not included
Setup of BeCOMS / BCom system
via the user-interface of the Evaluator or
via RS485 (text based setup using a terminal
program)
x x x
Displays Thermosignal in % alarm level x x x
Displays Thermosignal AC effective in % alarm
level
x x x
Displays Thermosignal DC effective in % alarm
level
x x x
Displays Thermosignal in mV x x x
Triggers (Pre)Alarm using AC and DC thermo
signal
x x x
Auto-check of SRE sensor by Evaluator x x x
Error Monitoring on Display x x x
AC and DC alarmlevels separately adjustable x x x
Displays engine speed in RPM x x x
Triggers overspeed alarm x x x
Different AC alarmlevels for 2 adjustable RPM
levels
x x x
Shows measured values in a graphic overview
display
x x x
Recording of data for Damage Localization x - -
Recording data of combustion cycle performance x - -
Data-output via RS485 x x x
Data-output via RS485 for combustion cycle x - -
Data-output via RS485 for Damage Localization x - -
Table 1.2. Features
1.1.4. Editions of BCom System