Motcom BeCOMS BCom, User Manual, Page: 31 / 82

motcom® BeCOMS® | BCom
User Manual
Release
130301 (revision 190211)
Page 3.3
As soon as BCom Evaluator is powered up, it starts the initial self check procedure
and shows the READY status if all pre-set conditions are fulfilled. This self check
procedure is carried out in a certain cycle.
Regardless of the GREEN READY LED status of the BCom Evaluator, if a working
BCom Slip Ring Encoder is connected to it, the BCom Evaluator samples the signals
from the BCom SRE at a certain sampling rate. After that, the Evaluator converts
them into digital signals, analyzes, evaluates and displays them on its LCD-display.
These data including detected events are continuously made available through the
RS485 interface to the installed PC with BCom Data_Logger software for remote
monitoring and further processing. It is also possible to set up some BCom Evaluator
parameters from the PC using standard Windows HyperTerminal application.
Depending on the configuration, the BCom Data_Logger software can manage up
to 6 BCom systems on a single computer. The measured values and events will
be monitored and displayed continuously on the computer, and stored in a distinct
directory on the hard disk for each connected BCom system.
3.3. Data Sampling