Motcom BeCOMS BCom, User Manual, Page: 39 / 82

motcom® BeCOMS® | BCom
User Manual
Release
130301 (revision 190211)
Page 3.11
3.6.5.1.1. TS Alm-Level DC:
The value of DC main alarm level in the range of 0 to 5. The higher the value, the
less sensitive is the system. The 0 value disables the DC alarm.
Fig. 3.8. Setup Parameter: thermosignal
To change displayed value: press [Enter], the value field becomes highlighted. Use
[▲] and [▼] buttons to increase or decrease the number in the field or to select one
of provided text values. When the desired value appears in the field, press [Enter]
again.
The value will be successfully changed then if the correct PIN was entered before
in “Setup CPU” menu. Otherwise, the selected screen will display “P??” as shown
below:
Please refer to chapter 3.6.5.2.5. “PIN for Setup” for PIN setting instructions.
Fig. 3.9. BCom system measured values, second screen
i