Connection steps:
1. Turn of the DC switch and make sure it will not be turned on accidentally.
2. Strip the insulation layer and protective sleeve of the cable, and leave
cooper conductor in 7mm.
3. Insert the bare cooper conductor into the pin and make sure no bare cooper
conductor is exposed outside.
4. User a wire crimper to press tight the conductor and pin.
5. Insert the pin into the coupler body and lock it when there is a
6. Screw the end cap with a torque of 2.6~2.9NM.
7. Connect the connectors with the inverter terminals when there is a
8. Using a wrench to take apart the connection when it is necessary.
The Solar Family Series Inverter
22
of the DC switch and make sure it will not be turned on accidentally.
Strip the insulation layer and protective sleeve of the cable, and leave
cooper conductor in 7mm.
Fugure 26
Insert the bare cooper conductor into the pin and make sure no bare cooper
conductor is exposed outside.
User a wire crimper to press tight the conductor and pin.
Fugure 27
Insert the pin into the coupler body and lock it when there is a “click” sound.
Fugure 28
Screw the end cap with a torque of 2.6~2.9NM.
Fugure 29
Connect the connectors with the inverter terminals when there is a “click
Fugure 30
wrench to take apart the connection when it is necessary.
The Solar Family Series Inverter
of the DC switch and make sure it will not be turned on accidentally.
Strip the insulation layer and protective sleeve of the cable, and leave the bare
Insert the bare cooper conductor into the pin and make sure no bare cooper
sound.
click” sound.
