Power: the present power fed into
Today: Energy output to the grid during the present day
Total: Sum of the total energy output
To ensure a safe operation of the inverter under any temperature and electrical condition, the unit
will automatically derate the power to be supplied to the grid.
Power accuracy disclaimer:
The display values may deviate from the actual values
invoicing. The inverter’s measured values are required for the system management and to
control the current to be fed to the grid. The inverter does not have a calibrated meter.
: Indicate Power No Derating;
: Indicate Power Derating.
If the Power derating occurs, the detailed
Next to the Power status
symbol, the LCD displays operation
Mode, On-grid Mode, and Fault Mode.
: Indicate the inverter occur some faults, and the detailed information
“MESSAGE”
page
If
the inverter has no fault, the symbol will disappear.
6.2
Message page
The system status is identified through t
operation condition:
Waiting Mode, Self Testing Mode, On
following images are the symbol of power derating reason when inverter
: Indicate input voltage values are too high or too low;
: Indicate the ambient temperature is particularly high;
: Indicate frequency derating.
: Indicate power no derating.
Behind
the symbol of power derating reason
N PV Mppt
(SF1.6KTL, SF
I
PV1 and PV2 Mppt independent (
P PV1 and PV2 Mppt parallel (
The following symbol is
Real-
00 DIN VDE V 0126-1-1:2006+A1:2011
01 AS 4777—2005;
1. Grid Fault
Operation Condition
Warning or fault info.
The Solar Family Series Inverter
25
fed into the grid;
to the grid during the present day, and updated once every 10
output to the grid, and updated once every 10 minutes
To ensure a safe operation of the inverter under any temperature and electrical condition, the unit
will automatically derate the power to be supplied to the grid.
The display values may deviate from the actual values and must not be used as a basis for
s measured values are required for the system management and to
control the current to be fed to the grid. The inverter does not have a calibrated meter.
: Indicate Power No Derating;
, the detailed
reason will show in “MESSAGE” page.
symbol, the LCD displays operation condition:
Waiting Mode, Self Testing
grid Mode, and Fault Mode.
nverter occur some faults, and the detailed information
will show in
the inverter has no fault, the symbol will disappear.
Figure 35
The system status is identified through t
he MESSAGE page
; the first line displays inverter
Waiting Mode, Self Testing Mode, On-grid Mode, and Fault Mode.
following images are the symbol of power derating reason when inverter
derates.
: Indicate input voltage values are too high or too low;
: Indicate the ambient temperature is particularly high;
: Indicate frequency derating.
: Indicate power no derating.
the symbol of power derating reason is Real-time working mode symbol.
SF2.2KTL, SF3KTL)
;
PV1 and PV2 Mppt independent (SF3.6KTL, SF4.2KTL, SF4.6KTL, SF5K
PV1 and PV2 Mppt parallel (SF3.6KTL, SF4.2KTL, SF4.6KTL, SF5KTL);
-time
grid standard.
1:2006+A1:2011;
MESSAGE
Waiting
I 00
Grid Fault
Power Derating reason symbol
The Solar Family Series Inverter
, and updated once every 10 minutes;
minutes.
To ensure a safe operation of the inverter under any temperature and electrical condition, the unit
and must not be used as a basis for
s measured values are required for the system management and to
control the current to be fed to the grid. The inverter does not have a calibrated meter.
reason will show in “MESSAGE” page.
Waiting Mode, Self Testing
will show in
; the first line displays inverter
grid Mode, and Fault Mode.
The
working mode symbol.
KTL);
Power Derating reason symbol
