Parallel engine driven welder
M
34.3
REV.0 - 11/08
How to put two machines in parallel:
from the front panels of the machines connect the two positives welding s) between
themselves and the two negative welding sockets bethween themselves.
To effect the connection ask for the accessory K2X150.
ATTENTION
: use fit cables and tight at the connection point.
How to proceed:
- start the machine putting the two welding handles (T) in the wanted position (half of the total
current);
- put in parallel with the right cables;
- proceed with welding.
18/1
1/08 22262-GB
MAGIC WELD 200
MAGIC WELD 200 YD - YDE
