Morris CX 8105, Operator'S Manual

Page: 17 / 182

Safety
CX 8105 - Ground Drive December 2016 1-9
Safety Signs - Continued
Familiarize yourself with the location of all decals. Read them
carefully to understand the safe operation of your machine.
TANK BOLTS MUST BE A LOOSE FIT.
DO NOT REPLACE WITH SHORTER BOLTS.
N29729
2
1"
13 mm
MINIMUM TRAVEL
Cycle Collector Valve Daily
to ensure free movement.
N36264
IMPORTANT
Minimum of 5 cycles.
N21604
Silicone Lubricant or WD-40 or Penetrating Oil
IMPORTANT
and the Collector Body. A light coating of
Clean the Metering Body (Including Air Passages)
PREVENT CORROSION
should be applied before storage.
N42356
IMPORTANT
Ensure each meter is set correctly as described
BEFORE FILLING TANK
Ensure Tank clean out door is fully closed.
BEFORE APPLYING PRODUCT
Set rate according to the procedure and
rate chart described in the Operator’s Manual.
Take a sample and adjust the rate, if necessary.
AIR LEAKS AFFECT METERING ACCURACY
Ensure all seals are properly positioned and
all lids are tightly closed.
in the Operator’s Manual.
Decal on
Collector
N36265
Calibration
Bottom Pipe
Clean-Out
Pipe
Top