Morris CX 8105, Operator'S Manual

Page: 112 / 182

Monitor
6-26 December 2016 CX 8105 - Ground Drive
Area Display
There are two area counters, field area and total area.
They are both accumulated whenever the system “In
Motion” condition is true. Area counts are stored in
memory when the unit is turned off.
The area counts can be displayed on the “Operating
Screen” as outlined in “Navigating the Operating
Screen”. The FIELD AREA and the TOTAL AREA are
displayed to the nearest tenth of an acre (or hectare).
Resetting Area
To clear FIELD AREA and/or TOTAL AREA follow the
steps below.
• From the “Operating Screen” press the MENU key
to enter the “Settings Menu”.
• Use the Up/Down keys to highlight “Implement Setup”
press the SELECT key to enter the function.
• Use the Up/Down keys to highlight the desired
function of “Clear Field Area” or “Clear Total Area”
press the SELECT key to enter the function.
• The monitor will ask “Are you sure?” leave as “Yes”.
• Use the Up/Down keys to highlight “Enter Selection”
press the SELECT key to clear area and return to
the “Implement Setup” menu.
• Use the Up/Down keys to highlight “Exit and Save”
press the SELECT key to save the changes and
return to the “Settings Menu”.
Note: Field area will not be reset to zero when total
area is reset.