Morris CX 8105, Operator'S Manual

Page: 100 / 182

Monitor
6-14 December 2016 CX 8105 - Ground Drive
Monitor Settings
Navigating Settings Screens
The settings screens contain all the configuration
information required to tailor the monitoring capabilities
to the installed system and user preferences. Only
setting parameters that are relevant are displayed (i.e.
if no Shaft 3 is installed, there will not be any Shaft 3
setting parameters made available).
Pressing the MENU key when in the “Operating Screen”
enters this mode.
The menu system is made up of screens that have the
following content:
1) A menu title
2) The body of the menu
3) The soft key descriptions - changed to “Select” and
“Cancel”.
The Menu Title
The menu title is at the very top of the screen.
This indicates to the user what the rest of the screen
is referring to. For example, if the user is in the “Speed
Settings” menu, the field “Pulses Per Rev” refers to the
ground speed sensor and if the user were in the “Seed
Shaft Settings” menu, the field “Pulses Per Rev” would
refer to the seed shaft speed sensor.
The menu title line is always highlighted so that it stands
out from the rest of the screen.
The Body of the Menu
The main body of the menu is a list of objects. The
objects in the menu system will take up 1 or more lines
of space. The scroll bar on right hand side of screen
indicates where the object is in the list and when the
list has been wrapped.
When a menu is entered, the top object is always
highlighted. The highlighting of the object indicates to
the user the current object that they are on.
• If the Select key is pressed, the current object is
selected.
• If the Up or Down arrow keys are pressed, the
object above or below the current object is
highlighted.
• If Cancel is pressed, the menu exits without saving
anything and reverts back to the previous menu
that was displayed.
Operating Screen
PRESS SOFT KEY
UNDER MENU
Settings Screens
TO ENTER
SETTINGS MENU
THE MENU TITLE
THE BODY OF
THE MENU
THE SOFT KEY
DESCRIPTIONS
THE MENU TITLE
MENU OBJECTS
SCROLL BAR