background image

14

THIS SECTION IS ONLY APPLICABLE FOR 
CUSTOMERS IN UK AND IRELAND 

      REGISTERING YOUR TWO YEAR GUARANTEE 

Your standard one year guarantee is extended for an additional 
12 months when you register the product within 28 days of 
purchase with Morphy Richards. If you do not register the 
product with Morphy Richards within 28 days, your product is 
guaranteed for 1 year. To validate your 2 year guarantee register 
with us online at www.morphyrichards.co.uk 

N.B. Each qualifying product needs to be registered with 
Morphy Richards individually. Please refer to the one year 
guarantee for more information. 

      YOUR ONE  YEAR GUARANTEE 

It is important to retain the retailer’s receipt as proof of 
purchase. Staple your receipt to this back cover for future 
reference. Please quote the following information if the product 
develops a fault. These numbers can be found on the base of 
the product.  

Model no. 
Serial no. 

All Morphy Richards products are individually tested before 
leaving the factory. In the unlikely event of any appliance 
proving to be faulty within 28 days of purchase, it should be 
returned to the place of purchase for it to be replaced. If the 
fault develops after 28 days and within 12 months of original 
purchase, you should contact the Helpline number quoting 
Model number and Serial number on the product, or write to 
Morphy Richards at the address shown. You may be asked to 
return a copy of proof of purchase. Subject to the exclusions 
set out below (see Exclusions), the faulty appliance will then be 
repaired or replaced and dispatched usually within 7 working 
days of receipt. If, for any reason, this item is replaced during 
the 1 year guarantee period, the guarantee on the new item will 
be calculated from original purchase date. Therefore it is vital to 
retain your original till receipt or invoice to indicate the date of 
initial purchase. To qualify for the 1 year guarantee, the 
appliance must have been used according to the instructions 
supplied. For example, crumb trays should have been emptied 
regularly.  

      EXCLUSIONS 

Morphy Richards shall not be liable to replace or repair the 
goods under the terms of the guarantee where: 

1        The fault has been caused or is attributable to accidental use, 

misuse, negligent use or used contrary to the manufacturer’s 
recommendations or where the fault has been caused by power 
surges or damage caused in transit. 

2        The appliance has been used on a voltage supply other than that 

stamped on the products. 

3        Repairs have been attempted by persons other than our service 

staff (or authorised dealer). 

4        The appliance has been used for hire purposes or non domestic 

use. 

5        The appliance is second hand.  

6        Morphy Richards are not liable to carry out any type of servicing 

work, under the guarantee. 

7        Plastic filters for all Morphy Richards kettles and coffee makers 

are not covered by the guarantee. 

8        Batteries and damage from leakage are not covered by the 

guarantee. 

9        The filters have not be cleaned and replaced as instructed. 

         This guarantee does not confer any rights other than those 

expressly set out above and does not cover any claims for 
consequential loss or damage. This guarantee is offered as an 
additional benefit and does not affect your statutory rights as a 
consumer. 

      YOUR INTERNATIONAL TWO YEAR 

GUARANTEE 

This appliance is covered by two-year repair or replacement 
warranty. 

It is important to retain the retailers receipt as proof of 
purchase. Staple your receipt to this back cover for future 
reference. 

Please quote the following information if the product develops a 
fault. These numbers can be found on the base of the product. 

Model no.

         

Serial no. 

All Morphy Richards products are individually tested before 
leaving the factory. In the unlikely event of any appliance 
proving to be faulty within 28 days of purchase it should be 
returned to the place of purchase for it to be replaced. 

If the fault develops after 28 days and within 24 months of 
original purchase, you should contact your local distributor 
quoting Model number and Serial number on the product, or 
write to your local distributor at the addresses shown. 

You will be asked to return the product (in secure, adequate 
packaging) to the address below along with a copy of proof of 
purchase. 

Subject to the exclusions set out below (1-9) the faulty 
appliance will then be repaired or replaced and dispatched 
usually within 7 working days of receipt. 

If for any reason this item is replaced during the 2-year 
guarantee period, the guarantee on the new item will be 
calculated from original purchase date. Therefore it is vital to 
retain your original till receipt or invoice to indicate the date of 
initial purchase. 

To qualify for the 2-year guarantee the appliance must have 
been used according to the manufacturers instructions. For 
example, appliances must have been descaled and filters must 
have been kept clean as instructed.  

The local distributor shall not be liable to replace or repair the 
goods under the terms of the guarantee where: 

1        The fault has been caused or is attributable to accidental use, 

misuse, negligent use or used contrary to the manufacturers 
recommendations or where the fault has been caused by power 
surges or damage caused in transit. 

2        The appliance has been used on a voltage supply other than that 

stamped on the products. 

RN302000MEE Rev1.qxp_Morphy Richards Instruction Book  17/08/2020  15:03  Page 14

Summary of Contents for TURBO GLIDE





























Reviews: