Morphy Richards Jet Steam Elite User Manual Download Page 6

Page: 6 / 8

www.morphyrichards.com

ANTI-SCALE
SYSTEM

The anti-scale filter is designed
to reduce the build-up of
limescale which occurs during
steam ironing. This will prolong
the working life of your iron.
However, please note that the
anti-scale filter will not
completely stop the natural
process of limescale build-up.

When the anti-scale filter needs
replacing, the filter indicator
light

will flash.

NOTE: The unit will not switch
off, but you need to replace the
anti-scale filter as soon as
possible.

Replacing the
anti-scale filter

When the filter indicator light

flashes, you need to replace the
anti-scale filter

The steam generator needs to
be connected to the mains
supply and switched on.

Remove the tank from the base
unit.

Remove the anti-scale filter
which is situated behind the
tank, and replace the filter,
making sure the replacement
unit is pushed firmly in position.

Re-position the tank.

If the filter is not fitted correctly,
the unit will not function. The

filter indicator light

will flash,

accompanied by a beep sound.

Re-fit the filter and the unit will
operate as intended.

NOTE: A filter should last over
40 litres of hard water.

Replacement
anti-scale filters

To obtain replacement
anti-scale filters, telephone our
replacement parts number on:

0844 873 0726

•

If a new filter is not available,
you may continue operating the
appliance, but scale will build
up in the system. Replace the
anti-scale filter as soon as
possible. Part Number 01030.

FEATURES OF
YOUR STEAM
GENERATOR

Steam function

During the steaming process,
small amounts of water may be
ejected from the soleplate. This
is normal and can be avoided
by using the steam for short
amounts of time and only when
the iron is at the correct
temperature (the indicator light
on the iron goes out when
ready).

Sudden jolts of the boiler unit
can also cause water droplets
on the soleplate; therefore, do
not move the base unit during
ironing. We recommend for the
first time ironing that you iron
over an old towel.

Vertical steam

Hold the iron in a vertical
position between 1cm and 2cm
away from the item

. Press

the steam trigger

⁄

, this will

create vertical steam.

This feature is especially useful
for removing creases from
hanging clothes, curtains and
wall hangings.

MAINTENANCE

TO CLEAN A STAINLESS
STEEL SOLEPLATE

To keep the soleplate of your
iron clean and free of limescale,
we recommend that you use
one of the gentle chrome, silver
or stainless steel cleaners that
are generally available. Always
follow the manufacturer’s
instructions. To clean off melted
man-made fibres, set the iron
at 3-dot position and pass it
over a clean piece of cotton
which will draw the deposit off
the surface.

TO CLEAN A COATED
SOLEPLATE

In the unlikely event of any
man-made fibre fusing to the
soleplate, set the iron at the
3-dot position and pass it over
a clean piece of cotton, this will
draw the deposit off the surface.

Do not use scouring powder or
solution, as this could cause
damage to the coating.

To clean the
exterior

Allow the steam generator to
cool and wipe over with a
damp cloth and mild detergent,
then wipe with a dry cloth.

HELPLINE

If you have any difficulty with
your appliance, do not hesitate
to call us. We are more likely to
be able to help than the store
from where you bought it.

Please have the following
information ready to enable our
staff to deal with your query
quickly.

•

Name of the product

•

Model number as shown on
the underside of the appliance.

•

Serial number as shown on
underside of the appliance.

UK Helpline 0844 871 0960

Replacement Parts 0844 873 0726

Ireland Helpline 1800 409 119

Filter

Drawer