LOCATION
Locate the steam generator
horizontally on the rest plate of
your ironing board (if large
enough) or on a heat resistant
stand at the same height as
your ironing board or below it.
Always ensure the generator is
on a firm surface when ironing.
WARNING: Do not use the
product on a surface which
could be damaged by heat or
steam such as a worktop or
a polished wood surface.
If in doubt, contact Morphy
Richards on the helpline
number below.
BEFORE USE
Remove any protective sticker
from the soleplate and the base
unit, if any.
Unwind and straighten the power
cord
‡
and supply cord
fl
.
Slide out the water tank
·
and
fill (see filling instructions).
When ironing with the iron
temperature set at 2-dot
setting, the steam output
should be set at the lower end
of the steam range (on certain
models only).
Textiles and clothes are
supposed to carry ironing
instructions. If they don’t, you
should follow the Temperature
guide on this page, but be sure
to test the temperature by
ironing the hem of the garment
or a similar discreet area first.
If you turn the control dial
down from a hot setting to a
cooler setting, wait until the
iron temperature has stabilised
before you continue ironing.
FILLING
1
Place the steam generator on a
stable ironing board or table,
with the iron resting on its
stand.
2
Release the detachable water
tank by operating the tank
release knob
„
.
3
Slide the tank outward.
4
Fill the tank to the ‘fill to here’
line with clean tap water
A
.
IN HARD WATER AREAS,
THE USE OF DISTILLED OR
DEMINERALISED WATER
IS RECOMMENDED.
Never use battery topping up
fluid or water containing any
substances like starch, sugar,
fragrant additives or
defrosted water from a
refrigerator.
5
Re-position the water tank on
the base unit and push
securely into place. Please
make sure the tank is secure
B
.
Always pour out any remaining
water after use.
Refilling ‘in use’
1
The
‘Fill’ water tank indicator
light
Ê
will flash and a beeping
sound will be heard. This is a
warning to stop ironing and fill
the tank. Ironing can continue
for a short period, then the
generator will shut down until
the tank is refilled.
A
B
4
UK Helpline 0844 871 0960
Replacement Parts 0844 873 0726
Ireland Helpline 1800 409 119
Symbol
(120°C Max) Cool
(160°C Max) Warm
(210°C Max) Hot
Control knob
positions
Do not iron
at all
Fabric
Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing
Iron on wrong side,
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
Steaming
Dry
‘Max setting’
INSTRUCTIONS FOR USE
Temperature guide
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
RN42288MUK Rev8_Instruction Booklet 07/09/2011 13:56 Page 4
