background image

7

UK Helpline 0870 060 2614    

Replacement Parts 0870 157 6645

Ireland Helpline 1800 409119

For details of other Morphy Richards products, please see our website:

WEBSITE

You may also contact us
through our website, or visit
the site to browse and
purchase appliances, spare
parts and accessories from
the extensive Morphy
Richards range.

Location

Do not use outdoors.

Locate the steam generator
horizontally on the rest plate of
your ironing board (if large
enough) or on a heat resistant
stand at the same height as
your ironing board or below it.
Always ensure the generator is
on a firm level surface when
ironing.

IMPORTANT: Do not use the
product on a surface which
could be damaged by heat or
steam such as a worktop or a
polished wood surface.

If in doubt, contact Morphy
Richards.

Children

Children do not understand
the dangers associated with
operating electrical
appliances. Never allow
children to use, or play with,
this appliance.

Close supervision is necessary
when any appliance is used
near children.

Personal Safety

Do not use the vertical steam
feature on clothes that are
being worn.

WARNING: Burns can occur
from touching hot metal
parts, hot water or steam.
Use caution when using
your steam generator. If
your iron is placed for a few
moments on the iron rest
plate, this plate may reach
very high temperatures. In
this instance, do not touch

the iron soleplate or the iron
rest plate until the iron and
the iron rest have cooled
down.

WARNING: To protect
against the risk of electric
shock, do not immerse the
appliance in water or in any
other liquid.

Do not leave the steam
generator unattended whilst
plugged in or on an ironing
board. Never allow the mains
lead to over hang the work
surface.

The mains socket should
always be switched off before
plugging or unplugging from
the socket. Never yank the
cord to disconnect from the
socket, instead, grasp the
plug and pull to disconnect.

Other safety 
considerations

Use the steam generator only
for its intended use.

Never hold the steam
generator under a tap.

Always disconnect the steam
generator from the electrical
supply when cleaning or when
not in use.

If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified person(s)
in order to avoid a hazard.

Do not operate the steam
generator with a damaged
cord or if the iron has been
dropped or if there are visible
signs of damage or if it is
leaking. To avoid the risk of
electric shock, do not
disassemble the iron or steam
generator, but telephone
Morphy Richards for advice.
Incorrect reassembly can
cause a risk of electric shock
when the steam generator is
used.

If the need arises to change
the mains cable on your steam
generator or the iron, please
return to Morphy Richards

service department at the
address on the back page.

If your steam generator does
not work, check the following
points:

Has the iron temperature
control been set to the
required temperature? Is the
plug in its socket? Is the plug
itself or the socket faulty?
(Check by plugging in another
appliance).

To prevent damage to the
textile being ironed, follow the
temperature guide carefully.
(Test on the inside of the hem
of the garment).

If you drop or severely knock
your steam generator, this
could cause internal damage
even if the outside appears
alright. Have it checked by a
qualified electrician.

The temperature of accessible
surfaces may be high when
the appliance is operating.

ELECTRICAL 
REQUIREMENTS

Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must
be A.C. (Alternating current).

If the socket outlets in your
home are not suitable for the
plug supplied with this
appliance, the plug should be
removed and the appropriate
one fitted.

WARNING: A damaged or
severed mains cable fitted
with a plug should never be
connected to the mains
supply. It must be
destroyed, as a damaged
cable becomes hazardous if
connected to a power
socket.

Should the fuse in the 13 amp
plug require changing, a 13
amp BS1362 fuse must be
fitted.

WARNING: This appliance
must be earthed.

RN42288MUK Rev8_Instruction Booklet  07/09/2011  13:56  Page 7

Summary of Contents for Jet Steam Elite









Reviews: