Morpheus Gargoyle Owner'S Manual Download | Manualshive

Page: 14 / 60

background image

Morpheus Technologies Owner’s Manual

http://www.BaseRigs.com/

Page 14 Morpheus Technologies

The Gargoyle Twin Container

The Gargoyle Twin is a two-pin BASE specific container that features a “no tension” pin

protector flap. This flap is designed to open cleanly and quickly at low airspeeds, yet has

been thoroughly tested at terminal and withstands the performance of radical freefly

manoeuvres

The Gargoyle does not have enclosed corners at the base of the container. This ensures

the opportunity for optimum, on heading deployment. It’s streamline design and curved

yoke contours to the user’s body shape and length, allowing for maximum comfort and

flexibility. It comes standard with a complete bridle protection pocket and features a

continuous harness system made of type 7 and type 8 webbing. This assures maximum

strength at crucial junctures. The Gargoyle Twin can be ordered with Style, Stealth or

Streamlined Stealth riser covers.

Through observation and discussions with locals at several popular wingsuit cliff sites, we

saw a need to improve upon container opening characteristics during wingsuit

deployments. Hence the development of “Dynamic Corners”. This design allows the tray

to open fully, leaving no edges for the canopy or tail pocket to snag during high-speed

horizontal deployments.

The Gargoyle can also be ordered with an optional lower articulated harness. This,

combined with contoured legpads allow for a complete un-constricting range of motion

and comfort. The features are extremely useful whether jumping flat and stable or

performing any of today’s aerial manoeuvres.

Packing the Gargoyle Twin

Before placing the canopy into the container, read this manual through from cover to

cover. If there is any element that you do not understand please don’t hesitate

contacting us or contact a qualified rigger to assist you in assembly and packing.

«
...
12
13
14
15
16
...
»

Summary of Contents for Gargoyle





























































Reviews:

No comments

Related manuals for Gargoyle

Brand: Caldwell Pages: 4

Brand: Waldbeck Pages: 24

VFL500-SE Series

Brand: WE-EF Pages: 9

Archi Mini Harlekin

Brand: Herstal Pages: 2

Brand: MD SPORTS Pages: 9

Brand: In Vento Pages: 24

Brand: Sea gull lighting Pages: 4

Brand: Schelde Sports Pages: 6

Brand: GREENLUX Pages: 3

Brand: Salewa Pages: 19

Brand: Unicol Pages: 6

Brand: B-K lighting Pages: 6

Brand: Ballard Designs Pages: 3

Brand: Gill Pages: 4

UltraProffie ZERO

Brand: ULTRA SABERS Pages: 2

SmartStore SM2020

Brand: Riverlea Pages: 16

LED WALL PACK LIGHT

Brand: Greentek Pages: 2

Brand: Jaypro Sports Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands