31
MORNINGSTAR
CORPORATION
3.2.5 Meter Slave Function
Allow a Morningstar Device to control a Relay Driver channel
directly. (Future Use)
Common Applications:
Adding load control to Morningstar Devices
Adding Genstart control to Morningstar Devices
Setup
1. From the Relay Driver Setup screen, choose either
Simple
or
Advanced
setup. (it does not matter which
setup type is chosen)
2. Select
Meter Slave
from the Function list.
Click
Finish
.
The channel is now configured for Meter Slave. The Relay
Driver Setup screen should display the Meter Slave Function
parameters in the Configuration Summary for the channel.
If all four channels are configured as desired, refer to section
3.3 for instructions on how to program the Relay Driver.
Summary of Contents for RelayDriver
Page 9: ......
