1.
2.
After you have copied your desired preset:
Press the switch you want overwrite or swap your copied preset with (it can be from any bank)
Press [D+F] > Preset > Paste, Swap
Paste - Will overwrite the current preset with your copied preset.
Swap - Will cause your copied preset and current preset to exchange positions.
Dual Switch Press Functions
Dual switch press combinations allow you to control certain
and access
beyond the first 16 presets.
utility functions
hidden presets
Utility Function
Switches
Bank Down
B+C
Bank Up
A+B
Enter Editing Menu
D+F
Toggle MIDI Thru On/Off
A+F
You can also use dual switch presses to trigger the presets on page 2 without having to toggle page.
Hidden Preset (on page 2 of each bank)
Switches
G
D+E
H
E+F
I
A+D
J
B+E
K
C+F
Global Settings
To access the Global Settings Menu, press switches [D+F] and then press Config. The following options will be displayed and you can use the Ne
button to scroll through more settings options.
xtPage
[MidiChnl] - MIDI Channel
Set the MIDI receive channel for the MC6. The MC6 can receive and respond to MIDI messages from other MIDI controllers. Press Up or Down
to select your desired MIDI receive channel.
[Reset] - Factory Reset
To perform a factory reset, hold down for 2 seconds. The display will show that it is performing a factory reset.
[ExpInpt] - Exp 1 & 2 Ports (OmniPort) Settings
Set what each Omniport functions as – MIDI Output, Expression Pedal Input or Aux Switch Input. For more information, please refer to the
section of this manual.
[SwSens] - Switch Sensitivity
Set switch sensitivity. Choose from 1 (least sensitive) to 5 (most sensitive). Pressing switches [B+C] will select level 3 sensitivity. Higher
sensitivity means less delay between the time when a switch is pressed and when MIDI messages are sent out.
Press Save to set the channel before exiting.
[BnkChgDl] - Bank Change Delay
Adjust the time it takes to load the next bank when the bank is changed. The unit of measurement is in milliseconds.
All user presets will be erased and all settings will be reset to factory default.
By default, sensitivity is set to level 3 and should be comfortable for most users. Depending on personal preference, you may adjust
sensitivity to help you bank up/down (by stepping on 2 switches at once) more accurately.
