R O T A R Y
PAGE 14
Setting - Inking ........................................................... Fig 4.11
4.1 .......Setting
Set the Ink Transfer Roller so that it runs fully over the numbering
head, by releasing it's locking screw with a 2mm Allen key.
Set the Inking Pod position by releasing it's thumb screw and
positioning it so that it inks up the Transfer Roller, in the area
above the numbering head.
Section 4
INKING
4.2 .......Fitting Ink Roller to Pod
The Inking Pod Assembly may be removed from the machine by
removing the locking thumb screw and lifting the Pod off the shaft.
There are two types of Ink Roller available, the standard preloaded
type and a re-inkable type. The Ink Roller may be replaced by
removing the ink roller screw, (see Fig 4.21) using a 4mm Allen key.
