Page 26
Page 27
DocuFold Pro
Tools Menu.
To get to the Tools page click the lower tab
Machine main board
software revision
Touch screen software
revision
Operating the DocuFold Pro
Operating the DocuFold Pro
Clicking this icon will
show Machine
program revision &
Touch Screen
software revision.
Touch Screen Calibration
Change Machine measurement
settings, Imperial / Metric
See Page 27
Touch Screen Calibration.
1.
Switch the mains power on and wait for the main screen to appear before
commencing to check the horizontal and vertical position of the display.
The position of the display within the surround is achieved by operating the button
at the rear of the housing, press this a number of times to obtain the correct
orientation required, move to the next button to move the position to centralize
horizontal.
2.
(i) Select the tools menu tab, and then Select the Touch Screen calibration icon.
(ii) Using a plastic pointer, soft leaded pencil, biro cap etc. and with gentle pressure.
Touch the centre of the cross in each corner of the Touch Screen, as prompted, by
the hand graphics. This procedure will calibrate the Touch Screen.
Brightness
Contrast
Horizontal
Vertical
UP
(Increase value)
DOWN
(Decrease value)
Display
ON/OFF)
AV / Display
Channel
