Setting Pages.
Paper settings Page
Paper size Selection.
Page 14
Page 15
DocuFold Pro
PAPER
FOLDER
Batch size Selection.
Speed Selection
Pre-set Batch sizes
for quick insertion.
Operating the DocuFold Pro
Operating the DocuFold Pro
DocuFold Pro
Page Length – On selection the status area is replaced with a
calculator for inputting new values. Length range = 190mm – 900mm
Fold Selection – For quick setting of crease positions on standard size sheets.
Highlighted fold is type currently selected, other folds may be selected.
Currently selected fold is shown in status area.
Select the Ruler icon to set the fold positions manually.
Vacuum suck – There
are three selections
available – 1 short
suck, 2 long suck & 3
continuous for stream
feeding.
Highlighted number is
type currently selected.
The status area also
shows the currently
selected suck.
Batch Button – Image
is identical to that
shown in the status
area. On selection the
status area is replaced
with a calculator for
inputting new values.
Batch sizes of 1 to
998 may be set.
Arrows may be
selected to increase
or decrease the page
size in 0.1mm
increments.
Perforating / scoring
button.
Speed Selector – On
selection a speed
adjustment screen
will appear.
Perforating / scoring
with fold button.
Toggle between, Delay between batches
and stop after batch
Pre-set Paper sizes for
quick insertion - Standard
sizes for country origin
would be shown.
Paper length input
Feed Speed selection
slider - 20 positions to
choose from.
Note: Motor speed will
not change until you
select run.
