Page 20
Page 21
DocuFold Pro
Run Job.
System Switch Not On, warning.
The display will briefly show that the fold plates and delivery roller are moving to their set
positions, (as shown below).
Click to run machine.
Operating the DocuFold Pro
Operating the DocuFold Pro
Status Screen.
Click to confirm System
switch is on. Switch
Compressor switch on &
then click run button again.
Or click the icon
to run three test sheets.
Clicking in this area will take
you to the fold settings
page.
Paper length
- input from the
paper setting screen.
Clicking in this area will take
you to the delivery setting
page.
Fold Positions & Trim
settings
Batch quantity - this is
input from the batch
calculator on the paper
setting screen - max. 999
Click to start machine with settings currently
shown -
you will receive a notification if
system switch is not on. Press again to stop
Job
Green icon indicates settings
are saved - a red icon would
show that settings have
changed but the job
has not been saved.
Currently selected fold type
- can be one of the
following.
Speed selector - On
selection a speed
adjustment screen
will appear
Currently selected Vacuum
Suck setting - for slow pulse
- for stream feed choose
choose selection 2
selection 3
Select this button to produce
3 test sheets with the
settings currently shown.
Clicking in this area will take
you to the store page
confirm that you want to
Sheet count -click to zero
A screen will appear to
reset the count.
Batch count - click to zero
A screen will appear to confirm that
you want to reset the count.
