Page 9
SYSTEM
Quick Start Guide
Move the selection switch to the left to select the
, or to the right to
Tens
select
. The
or
(whichever has been selected)
Decimals
Tens
Decimals
can then be adjusted by rotating the Selection Switch, (clockwise to
increase or anti-clockwise to decrease).
7. To set the 2nd Crease position move the selection switch down; the 2nd
Crease is selected and can be set as described in step 6. Above
8. Further creases can be set in this way, up to a maximum of nine
9. When the required creases have been set, move the selection switch up
step by step until the display contains the word
, see below.
Feed
15.
16.
Press the System Switch down, the display will momentarily read
Please
Move the selection switch down to select
, and feed the sheets
Feed
creases.
Wait Initiating
High Speed
Low Speed.
and then return to show
or
17.
individually into the rollers.
When the sheets have been fed into the machine and creased; move the
selection switch up, to select
, and then press the System
Stop Feeding
Switch up to stop the machine.
10.
11.
Move the selection switch to the right to select
.
Setup
Move the selection switch to the right again to select
.
More
12. Move the selection switch up or down to select
or
.
High Speed
Low Speed
13. Move the selection switch to the right to select
.
Ok
14. Move the selection switch up step by step until the display contains the
word
.
Feed
2 Creases
Program 3
Total
20
Zero
Setup
Tools
Feed
6.
Back
Tens
Decimals
3rd Crease
0.0
( 2nd Crease
000.0 )
Set Creases
DigiCreaser
