Page 3
SYSTEM
INTRODUCTION
system designed for use with both conventional litho and digital printers.
630mm x 330mm (24.8” x 13”) and weights up to 400gsm.
Up to nine creases can be programmed to a single sheet.
The crease is programmed from the leading edge of the sheet using the
controls on the front panel.
A minimum distance between creases is 0.1mm.
programmed creasing operations.
The blade and anvil are mechanically controlled over their entire length
and can be adjusted to accommodate various weights of media.
The Digicreaser has up to nine available memory addresses for
The Digicreaser is capable of creasing sheet sizes to a maximum of
The Morgana Digicreaser is a fully automatic, after feeding, creasing
DigiCreaser
DigiCreaser
