8
9
OVEN TIMER
SETTING AND USING THE OVEN PROGRAMMER/TIMER
BEFORE FIRST USE
• To remove any residue from the oven that may have been left from the manufacturing
process, then select the fan oven function and set the thermostat to its maximum
temperature setting.
• It is perfectly normal for an odor to be produced during this process.
• Ensure that any windows in the room are left open during this process.
• It is advisable for you not to remain in the room whilst the burning off process is taking
place.
• You should leave the oven on maximum setting for 30 – 40 minutes.
• After the oven cavity has cooled, it should then be cleaned with warm soapy water, using
either a sponge or soft cloth. No abrasive cleaners should be used.
• The exterior of the oven should be cleaned with warm soapy water, using either a sponge or
soft cloth. No abrasive cleaners should be used.
• We would recommend that an appropriate stainless steel cleaner and polish is regularly used
on the stainless steel surfaces of this appliance.
OVEN TIMER
THE MINUTE MINDER FUNCTION
The minute minder function is a countdown time that can be set on the oven
programmer/timer. When the countdown time has finished, an audible signal will sound.
• Press the programme button (12) twice. The decimal point (9) starts to flash and the minute
minder symbol (10) will light on the display and will show “00:00”.
• Use the plus (11) and minus (13) buttons to set the countdown time that you require.
• The maximum countdown time that can be set is 23 hours and 59 minutes.
• When the correct countdown time appears on the LED display, release the plus and minus
buttons and the countdown will start immediately.
• The minute minder symbol (10) will remain in the LED display to show that a countdown time
is in progress.
• After a few seconds the LED display will return to showing the time of day.
• At the end of the countdown time, an audible signal will sound and the oven in use symbol
will go out. The audible signal will sound for 7 minutes before switching off or you can
silence it by pressing any of the oven timer buttons.
IMPORTANT: If the oven is in use whilst using the minute minder function, the oven WILL NOT
switch off at the end of the countdown time. YOU MUST turn the oven function selector knob
and the thermostat control knob to their OFF positions.
THE SEMI-AUTOMATIC COOKING FUNCTION
This function will allow you to set a countdown time similar to the minute minder function,
however the oven will switch off at the end of the cooking time.
• Place the food that you want to cook inside of the oven and close the door.
• Select an oven function and cooking temperature using the relevant control knobs.
• Press the programme button (12) three times. The decimal point, the oven in use symbol (8)
and the Automatic cooking symbol (7) will flash on the LED display. The display will show
“00:00”.
• Use the plus (11) and minus (13) buttons to set the cooking time that you require.
• The maximum countdown time that can be set is 10 hours.
• When the correct countdown time appears on the LED display, release the plus and minus
buttons. Cooking will begin immediately, after a few seconds the countdown time will start.
• At the end of the cooking time the oven will turn off and an audible signal will sound. The
automatic cooking symbol (7) and the minute minder symbol (10) will flash on the LED
display.
• To reset the oven and cancel the audible alarm, press any button once to stop the alarm.
Then press and hold the programme button twice for 3 seconds. After the first press the oven
time will flash, and on the second press the oven in use symbol appears on the LED display
and the automatic cooking (7) symbol goes out.
IMPORTANT: If you have not turned the oven function selector knob and thermostat control
knob to their OFF positions, when you reset the oven it will continue to heat.
THE END OF COOKING FUNCTION
This function is similar to the semi-automatic function, however instead of setting a countdown
time, you select the time of day that you want the oven to switch off at.
• Place the food that you want to cook inside of the oven and close the door.
• Select an oven function and cooking temperature using the relevant control knobs.
• Press the programme button (12) four times. The decimal point starts to flash, and the oven
in use symbol (8) and the Automatic cooking symbol (7) will light on the LED display.
• The display will show the current time of day which will flash. Use the plus (11) and minus
(13) buttons to set the cooking end time that you require.
• The maximum end time that can be set is 10 hours into the future.
• When the correct end time appears on the LED display, release the plus and minus buttons.
Cooking will begin immediately, after a few seconds the countdown time will start.
• At the end of the cooking time the oven will turn off and an audible signal will sound. The
automatic cooking symbol (7) and the Minute Minder symbol (10) will flash on the LED
display.
• To reset the oven and cancel the audible alarm, press any button once to stop the alarm.
Then press and hold the programme button twice for 3 seconds. After the first press the oven
time will flash, and on the second press the oven in use symbol appears on the LED display
and the automatic cooking (7) symbol goes out.
IMPORTANT: If you have not turned the oven function selector knob and thermostat control
knob to their OFF positions, when you reset the oven it will continue to heat.
THE AUTOMATIC COOKING FUNCTION
This function enables you to set the time of day that you want the oven to switch off at and
how long you want the oven to cook for.
• Place the food that you want to cook inside of the oven and close the door.
• Select an oven function and cooking temperature using the relevant control knobs.
• Press the programme button (12) three times. The decimal point starts to flash, and the oven
in use symbol (8) and the automatic cooking symbol (7) will light on the LED display.
MBO-7700D(IM)061016_Layout 1 10/7/16 11:15 AM Page 5
