2
1.
Disconnect and isolate the battery negative cable.
2.
Using trim stick C4755 or equivalent, remove the cen
ter bezel (2) from the instrument panel (1) by releasing
the snap retainers from the instrument panel.
3.
Disconnect the electrical connectors.
4.
Remove the center bezel from the vehicle.
5.
Remove the radio mounting fasteners (1).
CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec
tor could damage the cable or radio.
6.
Pull the radio out far enough to access the back of the
radio.
7.
Disconnect the AM/FM antenna (2) and electrical con
nectors (1).
8.
If equipped, disconnect the navigation antenna (3).
9.
If equipped, disconnect the USB connectors (4).
10. Remove the radio from the instrument panel.
11. Position the new radio to the instrument panel.
12. Connect the AM/FM antenna (2) and electrical con
nectors (1).
13. Connect the satellite/navigation antenna (3).
14. If equipped, connect the USB connectors (4).
Dec 31, 2010
K6861192
