2
1.
Disconnect and isolate the negative battery cable.
2.
Using trim stick C4755 or equivalent, disengage the
center trim bezel (1) retaining clips.
3.
Reach behind the bezel and disconnect all electrical
connections.
4.
Remove the center bezel from the instrument panel.
5.
Remove the radio mounting fasteners (1).
6.
Pull the radio (2) out far enough to access the back of
the radio.
CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector
could damage the cable or radio.
7.
Disconnect the AM/FM antenna (2) and electrical con
nectors (1).
8.
If equipped, disconnect the navigation antenna (3).
9.
If equipped, disconnect the USB connectors (4).
10. Remove the radio from the instrument panel.
11. Position the new radio to the instrument panel.
12. Connect the AM/FM antenna (2) and electrical con
nectors (1).
13. Connect the satellite/navigation antenna (3).
14. If equipped, connect the USB connectors (4).
Dec 31, 2010
K6861192
