3
CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec
tor could damage the cable or radio.
7.
Remove the radio mounting fasteners.
8.
Pull the radio out far enough to access the back of the
radio.
9.
Disconnect the AM/FM antenna (2) and electrical con
nectors (1).
10. If equipped, disconnect the navigation antenna (3).
11. If equipped, disconnect the USB connectors (4).
12. Remove the radio from the instrument panel.
13. Position the new radio to the instrument panel.
14. Connect the AM/FM antenna (2) and electrical con
nectors (1).
15. Connect the satellite/navigation antenna (3).
16. If equipped, connect the USB connectors (4).
17. Install and tighten the radio mounting fasteners.
18. Position the center bezel to the instrument panel.
19. Reach behind the bezel and connect all electrical con
nections.
20. Lower the center bezel (1) into position and engage
the lower hook type clips.
21. Press firmly and evenly around the perimeter and
across the middle of the bezel to engage the retaining
clips.
22. Connect the negative battery cable.
Dec 31, 2010
K6861192
