Mopar K6860899, Instruction Manual, Page: 98 / 121

3
ALL VEHICLES
1. Using trim stick C­4755 disengage clips holding the
passenger side door sill scuff panel (3) and (5) to door
sill.
2. Starting at the forward end of the door sill scuff panel,
pull upward on the sill scuff panel in order to disen­
gage the clips (2) attaching the sill scuff panel to the
door opening flange (4).
3. Remove the door sill scuff panel (3) and (5) from ve­
hicle.
NOTE: Driver side shown, passenger similar.
4. Using trim stick C­4755, disengage cowl trim panel
(1) clips from the corresponding locations in the sheet
metal (2).
5. Remove the passenger side cowl trim panel (1) from
the vehicle.
6. Position the rear passenger side seat down.
7. Secure the Wi­Fi Router cradle (2) with the supplied
fasteners on the back of the passenger rear seat.
8. Measure 184.15 mm (7.25 in.) (3) from the split of the
seat back to the left side of the Wi­Fi Router.
9. Measure 76.2 mm (3 in.) (4) from the bottom edge
(seam) of the seat back to the Wi­Fi Router cradle.
Feb 12, 2010 K6860899 Rev. 2