4
15. Release the remaining 13 retaining clips (1) and re
move the trim panel (2).
CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec
tor could damage the cable or radio.
16. Remove the radio mounting screws.
17. Pull the radio out far enough to access the back of the
radio.
18. Disconnect the AM/FM antenna (2) and electrical con
nectors (1).
19. If equipped, disconnect the navigation antenna (3).
20. If equipped, disconnect the USB connectors (4).
21. Remove the radio from the instrument panel.
22. Position the new radio to the instrument panel.
23. Connect the AM/FM antenna (2) and electrical con
nectors (1).
24. Connect the satellite/navigation antenna (3).
25. If equipped, connect the USB connectors (4).
26. Install the radio mounting screws.
27. Position the trim panel (2) into place and fully seat all
19 retaining clips (1).
Dec 31, 2010
K6861157 Rev. 1
