6
34. If equipped with power windows, position the switch
assembly (2) to the trim panel (1), connect the electri
cal connector and install the switch.
35. For vehicles without power windows, install the stor
age bin assembly.
36. Reconnect the negative battery cable.
SDARS/NAVIGATION ANTENNA CABLE AND ANTENNA INSTALLATION
HARD TOP
CAUTION: Be certain all fasteners are removed. Failure to follow these instructions will result in hardtop dam
age.
1.
From inside the vehicle, release the center clamps (1).
2.
Release the rear clamps (2).
3.
Remove the rear thumb bolts (3).
4.
Release the front top clamps (4).
Dec 31, 2010
K6861157 Rev. 1
