www.miinet.com
Moore Industries-International, Inc.
- 9 -
User’s Manual
235-781-00D
June 2019
T2X RTD Temperature Transmitter
T2X
Specifications
Input Accuracy:
Platinum RTD,
±0.2°C (±0.36°F)
Nickel RTD,
±0.16°C (±0.29°F)
Copper RTD,
±1.2°C (±2.16°F)
Ohms, ±0.4Ω
Output Accuracy:
±0.05% of span
NOTE:
Overall accuracy is
determined by combining
input and output accuracy.
It includes the combined
effects of linearity,
hysteresis, repeatability,
and adjustment resolution.
It does not include ambient
temperature effect.
Stability (max. span):
1 year = ±0.12%
3 years = ±0.21%
5 years = ±0.27%
Measurement Cycle:
Output updates at least 8
times per second
Output Response Time
:
256msec typical, 300msec
maximum, for the output to
change from 10% to 90%
for an input step change of
0% to 100%
Ripple:
10mV peak-to-
peak measured across a
250ohm load resistor at
frequencies up to 120Hz
Over-Voltage Protection
:
Input, 4Vdc peak, max.;
Output, 48Vdc, max.
Digital Input Filter
:
User-selectable, 50/60Hz
Power Supply and Load
Effects:
Negligible within
specified power limits
Load Capability:
670 ohms @ 24V
Ω
= (Supply Voltage - 8V)
0.024A
Burnout Protection:
User-programmable,
Upscale to 24mA;
Downscale to 3.3mA
Output Current Limiting
:
25mA maximum
RTD & Ohms Excitation:
250µA, ±10%
RTD Lead Wire
Resistance Maximum:
RTD resi 2 times
the lead wire resistance
must be less than 2000
ohms; Recommended <35
ohms per wire for three
wire inputs; <5 ohms per
wire for 10 ohm Cu inputs
Damping
: 0-5 seconds
(user selectable)
Ambient Tem-
perature
Operating & Storage Range:
-40°C to +85°C
(-40°F to +185°F)
Relative Humidity:
0-95%, non-condensing
Ambient Temperature Effect:
±0.03% of span/°C
RFI/EMI Immunity:
20V/M@20-1000MHz,when tested
according to SAMA standard 33.1.
(10V/m@80-1000MHz,
1kHz AM, when tested according to
IEC 1000-4-3-1995)
Noise Rejection
:
Common mode:
100dB @ 50/60Hz;
Normal Mode: 70dB typical at
200mV peak-to-peak @ 50/60Hz
All settings are made using
Moore Industries’ Intelligent PC
Configuration Software, and then
stored in non-volatile memory
HPP: 101 g (3.6 oz)
HPP in LH1: 428 g (15.1 oz)
HPP in LH2: 428 g (15.1 oz)
HPP in CH6: 173 g (6.1 oz)
Set Up
Weight
Performance
(continued)
Performance
Don’t See What You Need?
Accessories
Each T2X order comes with one copy of our
Intelligent PC Configuration Software (Windows
®
compatible). To order additional software or cables:
750-75E05-01
Intelligent PC Configuration Software
803-039-26
Isolated Serial Configuration Cable
(9-pin Serial Port)
Non-Isolated Serial Configuration Cable
(9-pin Serial Port)
803-040-26
Part Number
Part
Fuse Protected, Non-Isolated USB
Communication Cable (required by ATEX for
products installed in Intrinsically-Safe areas)
804-030-26
We offer a wide range of temperature assembly choices -
this data sheet provides just a few examples. Whatever your
temperature assembly needs are, our temperature interface
solution experts are ready to help!
