SPA
12
The Interface Solution Experts
Site-Programmable Volt &
Milliamp Limit Alarm Trips
Select Input Type
The menu for selecting the input type for the High
Level SPA is shown in Figure 7.
If the Password Jumper is not installed, the password
sub-menu is bypassed, and the Select V/I menu is
accessed by pressing SELECT from the display of the
measured input value.
1. From the “SEL V/I” display, press SELECT.
2. Use the up or down arrow buttons to scroll
through the two options for input type. The
default display for this menu is always the
last setting.
3. When the display shows the type of input,
current or voltage, that is to be used with
the SPA, press SELECT.
4. The next display is the menu for
the selection of functional options,
”CONF OPTS”. To skip the rest of the
configuration menus and return to the
display of the measured input value, press
the up arrow button 2 times (to “CONF
EXIT”), and press SELECT.
Figure 7. Selecting the HLPRG Input Type
VIEW
SELECT
VIEW
SELECT
FROM THE
MAIN MENU
CONF
EXIT
MA
0 50
VOLT
0 10
VOLT
0 10
MA
0 50
CONF
OPTS
VOLT
0 10
MA
0 50
SEL
V/I
TOGGLE
TOGGLE
DEFAULTS TO
LAST SETTING
RETURNS TO MAIN MENU
