background image

IMPORTANT SAFETY INSTRUCTIONS

WARNING - WHEN USING ELECTRIC PRODUCTS, THESE BASIC PRECAUTIONS SHOULD 
ALWAYS BE FOLLOWED.

1. Read all the instructions before using the product.

2. Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, in a wet 
basement, or near a swimming pool or the like.

3. This product, in combination with an amplifier and headphones or speakers, may be capable of 
producing sound levels that could cause permanent hearing loss. Do not operate for a long period of 
time at a high volume level or at a level that is uncomfortable. 

4. The product should be located so that its location does not interfere with its proper ventilation.

5. The product should be located away from heat sources such as radiators, heat registers, or other 
products that produce heat. 

6. The product should be connected to a power supply only of the type described in the operating 
instructions or as marked on the product.

7. The power-supply cord of the product should be unplugged from the outlet when left unused for a 
long period of time.

8. Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through 
openings.

9. The product should be serviced by qualified personnel when:
 

a. The power supply cord or the plug has been damaged.

 

b. Objects have fallen, or liquid has been spilled onto the product.

 

c. The product has been exposed to rain.

 

d. The product does not appear to operate normally or exhibits a marked change in  

 

       

performance.

 

e. The product has been dropped or the enclosure damaged.

INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.

Do not open the chassis. There are no user serviceable parts inside. Refer all servicing to qualified 
personnel only.

GROUNDING INSTRUCTIONS:

 This product must be grounded. If it should malfunction or breakdown, 

grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. 
This product is equipped with a cord having an equipment grounding connector and a grounding 
plug.  The plug must be plugged into an appropriate outlet that is properly installed and grounded in 
accordance with all local codes and ordinances.

DANGER: 

Improper connection of the equipment-grounding connector can result in a risk of electric 

shock. Check with a qualified electrician or serviceman if you are in doubt as to

 

whether the product 

is properly grounded. Do not modify the plug provided with this product – if it will not fit in the outlet, 
have a proper outlet installed by a qualified electrician.

Summary of Contents for Sub Phatty













































Reviews: