background image

33

MIDI OUT CHANNEL

To change the output channel, engage Shift mode and 
press the 

BANK 1, BANK 4,

 and 

PATCH 2

 buttons. The 

next key you press will determine the output channel. 
Pressing the low C selects Channel 1, C# selects 
Channel 2, and so on, all the way up to D# above middle 
C, which selects Channel 16.

MIDI INPUT SELECT

The Sub Phatty can send and receive MIDI data through 
the DIN jacks labeled 

MIDI IN

 and 

MIDI OUT

 or through 

its USB port, depending on your preferences.

To specify the MIDI In path, engage Shift mode and 
press the 

BANK 1, BANK 4,

 and 

PATCH 3

 buttons. 

Pressing the low C key will turn MIDI reception off. 
Pressing C# will cause the Sub Phatty to receive data 
through the 

MIDI IN

 jack only. Pressing D will cause it to 

receive data through the USB port only. Pressing D# will 
cause it to receive data through both the 

MIDI IN

 jack 

and the USB port (default).

MIDI OUTPUT SELECT

To specify the MIDI Out path, engage Shift mode and 
press the 

BANK 1, BANK 4,

 and 

PATCH 4

 buttons. 

Pressing the low C key will turn MIDI transmission off. 
Pressing C# will cause the Sub Phatty to send data 
through the 

MIDI OUT

 jack only. Pressing D will cause 

it to send data through the USB port only. Pressing D# 
will cause it to send data through both the 

MIDI OUT

 

jack and the USB port, which is the default setting.

MIDI MERGE USB

To set the MIDI Merge parameters for the USB port, 
engage Shift mode and press 

BANK 1, BANK 4, PATCH 

3,

 and

 PATCH 4

. Pressing the low C key will turn off 

MIDI merging. Pressing C# will cause data received by 
the USB port to pass through to the 

MIDI OUT

 jack only. 

Pressing D will cause data received by the USB port 
jack to pass through to the USB port only. Pressing D# 
will cause data received by the USB port jack to pass 
through to both the 

MIDI OUT

 jack and the USB port.

Channel 1

Channel 3

et

c....

Channel 2

Channel 4

MIDI Mer

ging OFF

USB P

ort T

o USB P

ort Only

USB P

ort In T

o

DIN MIDI Out Only

USB P

ort In T

o DIN 

MIDI Out & USB P

ort

MIDI Rec

ep

tion OFF

USB P

ort Only

MIDI IN Jack Only

MIDI IN & USB P

ort

MIDI T

ransmis

sion OFF

USB P

ort Only

MIDI OUT Jack Only

MIDI OUT & USB P

ort

Summary of Contents for Sub Phatty













































Reviews: