37
INITIALIZE GLOBAL PARAMETERS
Engage Shift mode and press
BANK 3, BANK 4,
and
PATCH 2.
Press C# twice to
reset the global parameters (Local Control, MIDI Output Filter, Use Preset Volume,
Use Preset MOD Wheel, Note Priority, Knob Wheel) to their default setting.
RESTORE FACTORY PRESETS
Engage Shift mode and press
BANK 3, BANK 4,
and
PATCH 3
. Press C# twice to
reload the Sub Phatty’s 16 factory presets.
NOTE
:
Invoking this command will delete any user presets.
NOTE CALIBRATION
Engage Shift mode and press
BANK 3, BANK 4,
and
PATCH 4
. Press C# twice to
run a full-range note calibration routine for the two oscillators. This will ensure that
the oscillators remain in tune in every octave throughout their entire pitch range.
SEND CURRENT PRESET
Engage Shift mode and press the
BANK 3, BANK 4, PATCH 1,
and
PATCH 2
buttons. Press C# twice to send all the settings for the current preset to your
computer as MIDI system exclusive data. If you record this data on your computer
and then send it back to the Sub Phatty, it will replace the patch that’s currently
loaded into the panel buffer. Once it’s in the buffer, you must manually save the
data to a preset location if you don’t want to lose it.
