background image

38

For additional hidden parameters and updates visit 

www.moogmusic.com/subphatty.

 

MIDI OPERATIONS

MIDI CHANNEL

By default, the Sub Phatty is set to receive and send MIDI on Channel 1, but it can be configured to 
send and receive to MIDI Channel (1-16). 

MIDI CONTROL CHANGE (CC) MESSAGES

The tables on the following pages list all MIDI CC messages for the  Sub Phatty.

MIDI CC VALUES FOR THE LFO CLOCK DIVIDER (CC #3)

TIME VALUE          

DIVISION                  

 

 

VALUE

1/32 Note Triplet                                                    1/32 T                    

 

 

 116-121

1/64 Note Triplet                                                    1/64 T                    

 

 

 122-127

1/32 Note                                                                1/32                        

 

 

 110-115

1/16 Note Triplet                                                     1/16 T                    

 

 

 104-109

1/16 Note                                                                 1/16                        

 

 

 98-103

1/8 Note Triplet                                                      1/8 T                       

 

 

 92-97

Dotted 1/16 Note                                                    1/16 DOT                

 

 

 86-91

1/8 Note        

 

 

                    1/8                          

 

 

 80-85

1/4 Note Triplet             

                                   1/4 T                       

 

 

 74-79

Dotted 1/8 Note   

 

                    1/8 DOT                 

 

 

 68-73

1/4 Note  

 

 

                    1/4                          

 

 

 61-67

1/2 Note Triplet     

 

                    1/2 T            

 

                               55-60

Dotted 1/4 Note Triplet                                         1/4 DOT                  

 

 

 49-54

1/2 Note   

 

 

                    1/2                   

 

 

 43-48

Whole Note Triplet  

 

                   WH T                       

 

 

 37-42

Dotted 1/2 Note    

 

                   1/2 DOT  

                

 

 31-36

Whole Note  

 

 

                   WH                   

 

    

 25-30

       

     

Whole Note + Half Note    

                   WH + 1/2                

 

 

 19-24

2 Whole Notes    

 

                   2 Whole                          

 

 13-18

3 Whole Notes    

 

                   3 Whole  

                

 

 7-12

4 Whole Notes     

 

                   4 Whole                          

 

 0-6

SEND ALL PRESETS

Engage Shift mode and press the 

BANK 3, BANK 4, PATCH 3,

 and 

PATCH 4

 

buttons. Press C# twice to send all 16 presets to your computer as a single Preset 
Bank file. If you record this MIDI system exclusive data on your computer and 
then send it back to the Sub Phatty, it will replace all 16 presets stored in the Sub 
Phatty’s memory.

Summary of Contents for Sub Phatty













































Reviews: