15
English
Mount the replacement part, which is sold separately, and tighten the ring holder
c)
with the special tool.
Note: 1. The replacement ceramic disc is protected by a rubber ring to prevent
breakage. When attaching, remove the rubber ring while being careful
not to damage the ceramic disc.
Note: 2. The ceramic disc has a front side and back side. When attaching it, do
so with the front side visible.
When replacing, completely dry the inside.
The ceramic disc has a front side and
back side.
*
Mount with the front side facing
upward.
Humidi
fi
er
Special tool
Ceramic disc set IMM-
DISC001
Ring holder
Ceramic disc
Rubber ring
Ceramic
disc
Remove the
rubber ring)
Front
Back
Storage
Perform care and cleaning by following the procedures in “Cleaning the Hybrid
Humidi
fi
er” and “Cleaning the Water Tank”, and fully wipe up any moisture inside
the humidi
fi
er body, and then allow it to dry completely in the shade. Put in a
plastic bag or the like, then pack it back in the original product box with the User’s
Manual and store in a place with low humidity.
01̲MOD-KH1101EU.indb 15
01̲MOD-KH1101EU.indb 15
2014/07/11 21:51:17
2014/07/11 21:51:17
