background image

12

English

Soak the felt in the case with aroma oil.

2. 

Check that felt is inserted in the aroma case. Soak the felt with two or three drops of 
aroma oil or essential oil (available commercially) while being careful that it does not spill 
outside the case. Next, insert the aroma case all the way inside the humidi

fi

 er.

CAUTION

Do not insert too much aroma oil or essential oil so that it overflows from the 

• 

aroma case.

Always wipe up any aroma oil or essential oil if it spills outside the aroma case.

• 

Do not insert the aroma case into the humidifier while aroma oil or essential oil is 

• 

spilt outside the aroma case.

Do not use with any felt other than that supplied with this humidifier.

• 

  This could damage the humidifier or cause malfunction.

Aroma oil or essential oil

Tab

Place the felt under the tabs so it does not stick up from 
the indentation in the aroma case. If it sticks up, it could 
get caught when inserting/removing the felt case.

Starting operation

3. 

To start operation, follow the procedures on page 9. Enjoy the mist containing the 
aromatic fragrance.
If aroma oil or essential oil is not added, it can be used as a regular humidi

fi

 er.

Replacing the Felt

Replace the felt whenever it becomes dirty, or when using a different type of aroma 

 

*

oil or essential oil.
In addition to the felt already included with the aroma case at purchase, two 

 

*

additional pieces are also included.
The felt cannot be washed and used again.

 

*

Insert the felt so that it fits under the clips in the aroma case.

 

*

Wash the aroma case with a neutral cleanser, and carefully wipe up any moisture 

 

*

before inserting it into the aroma base by following step 2.

 

Felt

Tab

01̲MOD-KH1101EU.indb   12

01̲MOD-KH1101EU.indb   12

2014/07/11   21:51:16

2014/07/11   21:51:16

Summary of Contents for MOD-KH1101EU



















Reviews: