www.Deuba24online.de
www.Deuba24online.de
Read the instructions carefully before
using the machine. Follow the notes and
safety instructions during use.
Wear eye protection, ear protection and
helmet.
Danger! Rotating knives. Keep hands and
feet outside the openings, while the ma-
chine is running.
Wait until the cutting tools have come to
a standstill before carrying out cleaning
or maintenance work.
Do not use as a step.
Wear protective gloves.
Protection class II - double insulation.
Guaranteed sound power level.
4. General safety information for power tools
Warning! Read all safety-related information
and safety instructions! Failure to observe the
safety information and instructions may result in
electric shock, burns and/ or severe injury. Keep
the safety information and instructions for future
reference. The term ‘power tool’ as used in the
safety information and instructions includes both
mains-operated tools (with power cord) and bat-
teryoperated tools (without power cord).
4.1 Safety at the workplace
Keep your working area clean, tidy and well-lit.
Disorder and poorly lit working areas may result
in accidents.
Do not operate the power tool in potentially
explosive environments containing combustible
fluids, gases or dusts. Power tools generate
sparks that may ignite dusts or fumes.
Keep children and other persons away while you
are operating the power tool. Distractions may
result in the operator losing control over the tool.
4.2 Electrical safety
Before switching on, make sure that the voltage
of your electricity supply is the same as that
indicated on the rating plate.
The mains plug of the power tool must fit into
the mains socket. The plug must not be modified
in any way. Do not use adapter plugs/connectors
in combination with tools with protective
earthing. Unmodified plugs and fitting sockets
reduce the risk of electric shock.
Avoid physical contact with earthed surfaces as
pipes, heaters, ovens and refrigerators. There is
an increased risk of electric shock if your body is
earthed.
Keep the tool out of the rain or moisture in
general.
The penetration of water into a power tool
increases the risk of electric shock.
Do not use the cord to carry or hang up the tool
or to pull the plug out of the socket. Keep the
cord away from heat, oil and sharp edges or
moving parts of the tool. Damaged or tangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use
exclusively extension cords that are approved for
outdooruse. The use of an extension cord that
is suitable for outdoor use reduces the risk of
electric shock.
If the operation of a power tool in a moist
environment cannot be avoided it is highly
recommended to use a residual current device
(RCD). The use of an RCD reduces the risk of
electric shock.
4.3 Personal safety
Always pay attention to what you do and apply
reasonable care when working with a power
tool. Do not use the power tool when you are
tired or under the influence of medication, drugs
or alcohol. When working with power tools, even
a short moment of inattentiveness may result in
severe injury.
Wear personal protection equipment and
always wear eye protection (safety goggles).
Wearing personal protection equipment as a
dust mask, nonslip safety shoes, safety helmet
or ear protectors (depending on the type and
application of the tool) reduces the risk of injury.
Avoid unintentional operation. Make sure that
the power tool is switched off before you connect
it to the mains supply and/or the battery and
whenever you pick up or carry the tool. When
carrying the tool with your finger on the on/off
switch or connecting the tool to the mains supply
with the switch in ‘ON’ position, this may result
in accidents.
Remove adjustment tools or wrenches and
the like before you switch the power tool on.
A wrench or other tool that is inside or on a
rotating part of the tool may cause injury.
Avoid unusual postures. Make sure to have a safe
footing and keep your balance at all times. This
will allow you to better control the power tool in
unexpected situations.
Wear suitable clothes. Do not wear wide
clothing or jewellery. Keep your hair, clothes and
gloves clear of all moving parts. Loose clothing,
jewellery or long hair may get caught in moving
parts.
If dust extraction/collection devices are provided
make sure that they are connected and used
properly. The use of a dust extraction device may
reduce risks caused by dust.
4.4 Use and handling of the power tool
Do not overtax the power tool. Use the power
tool intended for your type of work in each case.
The use of the suitable power tool within the
stated range of performance makes working
more effective and safer.
Do not use a power tool with a damaged switch.
A power tool that cannot be switched on or off
any more is dangerous and must be repaired.
Pull the mains plug and/or remove the battery
before adjusting a tool, changing accessories or
putting the tool aside. This precaution avoids the
unintentional start of the tool.
Store power tools that are currently not used out
of the reach of children. Do not allow persons to
use the tool if they are not familiar with the tool
or these instructions. Power tools are dangerous
if used by inexperienced persons.
Thoroughly maintain your power tool. Check
whether moving parts are working properly and
are not jamming/ sticking, and whether parts
are broken or otherwise damaged in a way
that may affect the function of the power tool.
Have damaged parts repaired before using the
tool. Many accidents are the result of poorly
maintained power tools.
Keep cutting tools sharp and clean. Thoroughly
maintained cutting tools with sharp cutting edges
are jamming less often and are easier to guide.
Use power tools, accessories, add-on tools, etc.
in accordance with these instructions and in the
way prescribed for the respective type of tool.
You should also consider the working conditions
and the work to be carried out. The use of power
tools for purposes other than those intended
for the respective tool may result in dangerous
situations.
4.5 Service
Have the power tool serviced by qualified
technical personnel only; repairs should be
carried out using exclusively original spare parts.
This will ensure the continued safe operation of
the power tool.
5. Safety Instructions for the Garden
Shredder
Wear protective gloves, glasses, and ear
protection. Do not wear loose-fitting clothing.
16
17
