39
Attaching the hand held steam cleaner (fig. 4)
1
Push the hand held steam cleaner (B) firmly into the steam mop
body (C) until it clicks into place.
Attaching a cleaning pad:
1
Because of barb design at the bottom of steam
head (D), just place a micro-fiber cleaning pad
(F) to the steam head, they can bond hard.
2
Place the front of your shoe onto the cleaning
pad removal tab and press down firmly.
Attaching Carpet Gilder:
1
Press the micro-fiber cleaning pad (H) with the main body to
carpet gilder (I) by vertical pressure
，
until it clicks into place.
2
Place the front of your shoe onto the cleaning pad removal tab
and press down firmly, the carpet gilder will remove the steam head.
OPERATION
1 Filling the water tank
•
Turn the water tank cap counter clockwise and remove from the tank.(fig.7)
•
Use the filling flask and pour water into the
tank. Do not overfill. Replace the cap on
the water tank. (fig.8)
2 Plug in the appliance to a grounded outlet.
3 The main body indicator light will be flash,
press the handle on/off switch (3), main body
indicator light will glow red, steam gear
indicator light (6) on the handle and main body
steam gear indicator light (10) will bright. After
25 seconds, the main body indicator light will
change blue. Steam will be release. (fig.9)
4 Press handle steam button (2), the user can
adjust steam volume according to different
objects.
Press ON/OFF switch
，
enter DUST setting at the same time , DUST indicator light will be bright
，
DUST setting is light steam for a quick dusting and best dry time.
Press steam button one time enter MOP mode; MOP and DUST indicator light will be bright at
the same time. The MOP setting is for normal, everyday steam cleaning.
Press steam button two times enter SCRUB mode; all MOP, DUST, SCRUB indicator light will be
