40
bright, SCRUB setting is for heavy cleaning and will leave floors damp.
Press steam button three times enter neutral mode: MOP,DUST,SCRUB indicator light will not
be bright, product stop working - Neutral mod; if you are not proceed the functional operation
within 6 minutes, the product will be switch into standby mode automatically. main body
indicator light will flash
）
.
Notice
：
In order to reduce the power consumption of the battery, handle on/off switch (3) on
the handle (A) , light will be put out automatically if you don’t operate within 6 minutes. Press
any key on the handle (A), it can wake up indicator light. .
Notice
：
When use the product to clean the floor, press steam button (2) and on/off switch (3)
on the handle (A). The handle steam gear indicator light (6) and main body steam gear
indicator light will bright at the same time. If press main body on/off switch (12) and main
body steam button , the indicator light on the handle will not bright at the same time. Press
key again on the handle (A), back to normal.
5 Clean your floors with a forward and backward motion.
When you are done, press the ON/OFF SETTING button until the red light flashing as in standby
mode.
6 When switch the appliance on, the red indicator lights will flash, it indicate preheating. If
the lights does not illuminate, please check the "troubleshooting" section for more details.
NOTICE: If power failure in the middle of the warm-up or power-off after the warm-up is
complete, turn the power supply on again, according to the interval of the power is turned on
again, the product may repeat the above warm-up operation.
7 When normal cleaning, the steam head has a big rotary angle, can clean corners and also can
clean low spaces. (fig. 10)
