Montesa COTA 4RT 260 2020, Owner'S Manual

Page: 70 / 158

(1) WATER PUMP COVER
(2) BOLTS
Install the following:
– Dowel pins, new O-ring
– Water pump cover, bolts
Fill the crankcase with recommended transmission oil
(page 3-8).
Fill the coolant and bleed air (page 3-9).
(1) DOWEL PINS
(2) NEW O-RING
(3) WATER PUMP COVER
(1) 3P (GRAY) CONNECTOR
Remove the ground eyelet bolt.
Remove the ignition coil mounting bolt.
Remove the spark plug wire/wire harness/breather hose
clamp.
Disconnect the ECT sensor 3P (Gray) connector.
(1) GROUND EYELET (2) BOLTS
(3) IGNITION COIL (4) WIRE CLAMP
(1) 2P (NATURAL) CONNECTOR
(1) TIE WRAP
Radiator Removal/Installation
Remove the following:
– Exhaust pipe
– Skid plate
– Fuel tank/injector assembly (page 4-7)
Disconnect the radiator 2P (Natural) connector.
Remove the spark plug wire tie-wrap from fan motor
shroud.
Engine servicing
4-17 4-17
3
2
1
1
1
2
1
4
3
2
2
1
1
1
1