Montesa COTA 4RT 260 2020, Owner'S Manual

Page: 119 / 158

(1) DUST SEAL
(2) STOP RING
(3) FORK SLIDER
Remove the fork damper assembly and centering plate
from the fork tube.
(1) FORK DAMPER
(2) CENTERING PLATE
(3) FORK TUBE
Hold the axle holder in a vise protected with a piece of
woods or soft jaws to avoid damage.
Do not overtighten.
Hold the fork damper using the special tool, then loosen
the right fork center bolt.
Remove the center bolt and sealing washer.
Tools:
Holder handle 07TMB-001010A
Damping Rod Holder Att, 4 pin 07AMB-NN4A200
(1) FORK DAMPER
(2) RIGHT FORK CENTER BOLT
Remove the dust seal and stop ring being careful not to
scratch the fork tube.
In quick successive motions, pull the fork tube out of the
slider.
Empty the fork fluid from the damper by pumping the
damper rod 8 - 10 times.
5-4 5-4
Frame servicing
2 1
3 2
2
1 1
3