Installation
5
1
Attaching the mounting unit to the
junction box
Attach the mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
AA
BB
NOTE:
The pre-installed support screws on the
mounting unit (AA) should protrude out away
from the junction box.
2
Making the electrical connections
Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the pre-installed
ground screw.
Connect the black to black (power), the white to white
(neutral), and copper wire to ground wire with the wire
nuts (CC) and secure the wire nuts (CC) with electrical
tape (not included).
NOTE:
If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
NOTE:
The fixture is designed to be mounted facing up
for the bottom drainage holes to be implemented.
CC
3
Securing the light fixture to the
junction box
Pull up the latch and open the door on the right side of the
light fixture (A) to access the interior.
Secure the light fixture (A) to the junction box by placing it
over the pre-installed screws on the mounting unit (AA)
and securing it with the cap nuts (DD).
A
AA
A
A
AA
DD
MONTEAUX LIGHTING
™
Please contact 1-800-446-9092 for further assistance.
4
Installing the light bulbs
Install one 60W Edison light bulb (included).
