SERVICE
FREEZER - LOW TEMP
“MANUAL DEFROST” MODE
If for any reason you need to initiate a “Manual
Defrost”, simply hold the
“down arrow”
button
(#3) for five seconds and the digital thermostat
will enter “Manual Defrost Mode”. During this
time, the display will cycle back and forth
displaying
“Temperatur/def”
. To return to the
“On”
mode, press and hold the
“Down
Arrow”
button (#3) for five seconds and the
display will show the current freezer base
temperature
only.
TEMPERATURE PROBE ERROR
If for any reason your digital thermostat is
displaying a flashing
“E0”
it means that there is
an error with the temperature probe 1 which is
reading the freezer box temperature. This is due
to either a loose connection or a damaged
temperature probe. Please inspect both the
connection and the temperature probe.
TEMPERATURE PROBE ERROR
If for any reason your digital thermostat is
displaying a flashing
“E1”
it means that there is
an error with the temperature probe 2 which is
reading the temperature of the evaporator coil
for defrost termination. This is due to either a
loose connection or a damaged temperature
probe. Please inspect both the connection and
the temperature probe.
9
Summary of Contents for FB-108-R
