23
3.6 GEN II SYSTEM ASSEMBLY
3.6.1 INSTALL GEN II SKID ON CART
Prevent death or serious injury.
Dry fertilizer skid weighs approximately 4700
lbs (2132 kg).
Use adequate lifting and support devices.
1.
Carefully position skid onto cart, with skid frame fully aligned with
cart frame and four mounting brackets on skid aligned with four
mounting brackets on cart. Mount fan end to the front of cart.
2.
Install (4) ¾” x 1.75 bolts from kit K002016 in each mounting
bracket as shown. Tighten lock nuts until they each contact the
plate.
3.
Alternate tightening nuts on bolt until each nut is tightened to 317
lb./ft. (430 Nm) of torque.
4.
Attach the two hose guide strap saddle assemblies on the cart as
shown in the drawing (see 3.3.10).
3.7 LIGHTING
3.7.1 LIGHT KITS FOR CARTS
Gen I light kit (A002184AA)
Required for all carts with Gen I or liquid units, carts with
wheelbases 152”-160”, and C12BA carts with
wheelbases over 120” also require K002067.
Gen II light kit (A002216AA)
Required for all carts with Gen II units, carts with
wheelbases 152”-160”, and C12BA carts with wheelbases
over 120” also require K002067.
Refer to Light Kits and Extensions Manual at