18
4.
Tighten bolts to 1349 lb/ft (1829 Nm) of torque.
5.
Lubricate tie rod ends again.
6.
Repeat steps 1-5 for other side.
7.
Tie rods will need to be checked for alignment by following
instructions in 4.1.3.
3.3.6 INSTALL WHEELS
Prevent death or serious injury.
Tire/wheel assembly weighs approximately
820 lbs (372 kg).
Use adequate lifting and support devices.
1.
Position wheel on spindle with an adequate lifting device.
Verify valve stem side is facing out.
2.
Install ¾-16 lug nuts. Tighten lug nuts to 354 lb/ft (479 Nm)
of torque in a crisscross star pattern.
3.
Repeat steps 1-2 for other side.
4.
Check torque on lug nuts after first hour of use and again
after first day of use.
3.3.7 INSTALL TRACKS
Prevent death or serious injury.
Track assembly weighs approximately
2320 lbs (1052 kg).
Use adequate lifting and support devices.
1.
Line up track (A) and spindle (B) with an adequate lifting
device.
2.
Place shaft assembly (C) through track and spindle. Refer
to track Owner's Manual for detailed assembly information.
3.
Secure shaft assembly to spindle by placing bolt (D) through
spindle and shaft. Attach nut (E) and tighten.
B
C
A
D
E
F
G
F
G
E