12
Label C
Label D
To protect against death or serious injury, all labels must be on the machine and must
be legible.
If any of these labels are missing or cannot be read, call Montag Manufacturing at 1-712-
852-4572, or e-mail [email protected], for replacement labels.
2.2.10 SAFETY DECAL CARE
•
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or have become illegible.
•
Replaced parts that displayed a safety sign should also display the current sign.
•
Safety signs are available from your Distributor or Dealer Parts Department or the factory.
How to Install Safety Signs:
•
Be sure that the installation area is clean and dry.
•
Decide on the exact position before you remove the backing paper.
•
Remove the smallest portion of the split backing paper.
•
Align the decal over the specified area and carefully press the small portion with the exposed sticky backing in place.
•
Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in place.
•
Small air pockets can be pierced with a pin and smoothed out using the piece of decal backing paper.